technical index:
Light source parameters:
LED light:LED12*40W RGBW OSRAM
LED lifespan :50000H
Control parameters:
Stroboscopic: 1: - 30 t/s
Control signal:DMX512 protocol 、RDM、 ArtNet 、SACN(optional)
Control channel: standard mode 17CH/ extended mode 58 CH/pattern mode 18CH/ HSI mode 11CH
Operating modes: DMX512 / master-slave/auto/Sound control
Cooling way: intelligent temperature control cooling fan, the fan off while temp. under 40℃（104℉）, while above 40℃（104℉）the higher the temperature the faster the fan is
Light source control modes: pixel control
Display function: 2.0 inch LCD color screen, can set the channel mode (standard/extended/pattern/HSI) horizontal vertical inversion, back screen, signal hint, switch in both Chinese and English, automatic screen off/lasting bright screen, display channel mode,light source temperature, fan speed, record boot time, and times of start,fault inspection, manual control channel data memory, the software version information, restore factory Settings, scan and color correction
LED work mode:support instant lights on and off
Scanning: the use of three-phased motors, Pan 540 degrees / 1.8s, Tilt 270 degrees/0.9s, 8-16 bit scanning, using photoelectric reset with automatic error correction function
ZOOM and light output Angle: electronic reset, running with 3 motors at the same time,9°--53° /1.7s
Color mixing system: electronic poleless dimming,RGBW poleless color mixing, rainbow effect, pixel control, circle control, full control, fixed background light color mixing, fixed background light pattern, fixed background light pixel control
Specifications：
Vol.& Fre.：AC100V~240V，50/60HZ
Power：550W
Safety Parameters：
Safety Protection：Automatically cut off the power supply when the machine or system fails
Ambient temperature: under 40℃（104℉）
Lighting Parameters：
Display：LCD display + 5 buttons
Program upgrade interface：Mini USB
Power interface：Powercon in and out
Signal interface：3pin+ network port or 3pin+5pin
Waterproof grade：IP20
N.W：14.4KG
